ID: 1620

100 x Impact anchor/ drop-in anchor galvanised M10 incl. technical approval 

  • Approved for anchoring in non-cracked concrete
  • Quick and economic fitting

Application:

The drop-in anchor is perfect for fixing climbing holds to non-cracked concrete.

Properties:

  • Drop-in anchors suit all screws and thread rods with metric thread
  • The low embedment depth reduces the drilling time and provides economic fixing
  • After driving repeated removing or fixing is possible as the anchor itself remains in the drill hole
  • Electrolytically galvanised
  • Approval no. ETA-04/0011 for anchoring in non-cracked concrete
  • Approval no. Z-21.1-1745 for anchoring in lightweight ceiling linings
  • Fire prevention checked

Principle of Operation:

After setting into the drill hole, the nose of the drop-in anchor is forced apart with a setting tool. Then the climbing hold is screwed into the inside thread.

Instruction for Use:

  • Drill a hole
  • Clean the drill hole with a brush and/or a blowout shot
  • Insert the drop-in anchor to the effective anchoring depth. This is reached when the expanding sleeve doesn\'t protrude beyond the concrete surface
  • By hitting the cone via the setting tool, the anchor is fixed. It is duly set when the setting tool is in contact with the sleeve
  • Screw the climbing hold into the thread.(Don\'t use more torque than allowed according to the table of technical data)

Technical Data:

  M 10
Drilling depth [mm] (achoring depth, embedment depth) 44
Drill hole diameter [mm] 12
Recommended resistance per anchor in non-cracked concrete [kN] incl. partial safety factor 3.0
Torque when anchoring 15
Thread diameter [mm] 10

Question about the item

We will answer your question within the shortest possible time. You are also welcome to contact us by phone at

+49-8631-988 200.

Request a quote

Of course, you can also ask us for an individual offer. Please send us the desired quantities.

Kunden interessierte auch